Contact parameters | Contact form | 2C | 4C | |
Contact load (resistive) | 8A/250VAC,30VDC | 5A/250VAC,30VDC | ||
Switching power (resistive) | 2000VA,240W | 1250VA,150W | ||
Contact resistance (initial) | ≤50mQ | |||
Contact material | Ag alloy | |||
Electrical life | 1×10⁵times | |||
Mechanical life | AC:2×10'times | |||
DC:5×10'times | ||||
Performance Parameters | Pull-in voltage(23℃) | DC:≤75%(Rated voltage),AC:≤80%(Rated voltage)50/60Hz(Rated voltage) | ||
Release voltage(23℃) | DC:>10%(Rated voltage),AC:>30%(Rated voltage)50/60Hz(Rated voltage) | |||
Maximum voltage(23℃) | 110%(Rated voltage) | |||
Coil power | DC(W) | About0.9 | ||
AC(VA) | About1.2 | |||
Closing time (rated voltage) | ≤20ms | |||
Release time (rated voltage) | AC | ≤25ms | ||
DC | ≤15ms,Built-in freewheeling diode type：≤25ms | |||
Insulation resistance | ≥1000MQ (500VDC) | |||
Medium withstand voltage | Between contacts of the same pole | 1000VAC/1min | ||
Between contacts of opposite poles | 2Z:2000VAC/1min(Leakage current 1mA) | |||
4Z:1500VAC/1min(Leakage current 1mA) | ||||
Between contact and coil | 2000VAC/lmin(Leakage current 1mA) | |||
Ambient temperature | -40-70℃ | |||
Ambient humidity | 5%-85%RH | |||
Atmospheric pressure | 86-106KPa | |||
Impact resistance | stability | 98m/S² | ||
strength | 980m/S² | |||
vibration | 10~55HzDouble Amplitude：1mm | |||
Installation | Plug-in | |||
Package | Dust cover type | |||
Weight | About32g | |||
Coil specifications (23°C)
Rated voltageV.DC | 6 | 12 | 24 | 48 | 100~110 | 220 |
Coil resistanceΩ | 41 | 165 | 662 | 2725 | 11440 | 53780 |
Rated voltageV.AC | 12 | 24 | 48 | 110~120 | 220~240 | |
Coil resistanceΩ | 45 | 180 | 785 | 4430 | 15900 |
Note: Coil resistance tolerance: Coil rated voltage nominal value below 110V 1±10%Ω, above 110V 1±15%Ω.
Dimensions (mm)
Wiring Diagram
