Contact parameters | Contact type | 2C | |
Contact load (resistive) | 10A/250VAC,30VDC | ||
Switching power (resistive) | 2500VA,300W | ||
Contact resistance (initial) | ≤50mQ | ||
Contact material | Ag alloy | ||
Electrical life | 1×10⁵times | ||
Mechanical life | AC:2×10'times | ||
DC:5×10'times | |||
Performance Parameters | Pull-in voltage (23℃) | DC:≤75%(rated voltage),AC:≤80%(rated voltage)50/60Hz(rated voltage) | |
Release voltage (23℃) | DC:≥10%(rated voltage),AC:≥30%(rated voltage)50/60Hz(rated voltage) | ||
Maximum voltage (23℃) | 110%(rated voltage) | ||
Coil power | DC(W) | about0.9 | |
AC(VA) | about1.2 | ||
Pull-in time (rated voltage) | ≤20ms | ||
Release time (rated voltage) | AC | ≤25ms | |
DC | ≤15ms,built-in freewheeling diode type：≤25ms | ||
Insulation resistance | ≥1000MQ(500VDC) | ||
Dielectric withstand voltage | Between contacts of the same pole | 1000VAC/1min | |
Between contacts of different poles | 2000VAC/lmin(leakage current 1mA) | ||
Between contact and coil | 2000VAC/lmin(leakage current 1mA) | ||
Ambient temperature | -40-70℃ | ||
Ambient humidity | 5%-85%RH | ||
Atmospheric pressure | 86-106KPa | ||
Impact resistance | Stability | 98m/S² | |
Strength | 980m/S² | ||
Vibration | 10-55Hz Double amplitude：1mm | ||
Installation method | Plug-in type | ||
Packaging type | Dust cover type | ||
Weight | About32g | ||
Coil specifications (23°C)
Rated voltage V.DC | 6 | 12 | 24 | 48 | 100~110 | 220 |
Coil resistance Ω | 41 | 165 | 662 | 2725 | 11440 | 53780 |
Rated voltage V.AC | 12 | 24 | 48 | 110~120 | 220~240 | |
Coil resistance Ω | 45 | 180 | 785 | 4430 | 15900 |
Note: Coil resistance tolerance: Coil rated voltage nominal value below 110V 1±10%Ω, above 110V 1±15%Ω.
Appearance Dimensions (mm)
Wiring Diagram
